Dwyer RMB-53-SSV Flow Meter, 5" Scale 10-100 SCFH Air, SS Valve

Description

Untitled Document
Dwyer RMB-53-SSV Flow Meter, 5" Scale 10-100 SCFH Air, SS Valve
Model:
RMB-53-SSV
| Order No:
RMB-53-SSV
Accurate within ±3% of full scale reading. Scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube.
Brand:
Dwyer
Model:
RMB-53-SSV
Order No:
RMB-53-SSV
Condition:
NEW
Description
Dwyer RMB-53-SSV Flow Meter, 5" Scale 10-100 SCFH Air, SS Valve
Dwyer RMB-53-SSV 5 inch Scale, Stainless Steel Flow Meter, 10-100 SCFH Air
Easy to read design - The direct reading scales eliminate troublesome conversions.
Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore.
The float is highly visible against a white background.
Construction assures accuracy - All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin.
The result is accurate and repeatable readings.
The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque.
Precision metering valves of brass or stainless steel (specify BV or SSV on order) are available as an optional extra and permit precise flow adjustments.
Installation is simple - The Rate-Master® flowmeter can be neatly through-panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone.
When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout.
Surface mounted units can also be held in place by the piping.
All mounting hardware plus installation and operating instructions are included.
Easy-to-Interchange bodies - Within a given Series Rate-Master® flowmeter bodies can be instantly interchanged.
Simply "unplug" the body from backbone and replace it with another.
O-rings provide a tight seal on inlet and outlet.
Piping remains undisturbed.
Interchangeability is useful where different scale ranges are sometimes required at the same location in the laboratory or plant.
Cleaning is easy - To release the plastic flowmeter body from the stainless steel backbone, just remove four screws.
Pipe thread flow connections remain undisturbed.
Remove the slide cover and the plug ball stop, clean the flow tube with soap and water and reassemble. It’s that simple.
Specifications:
Service: Compatible gases and liquids.
Wetted Materials: Body: Polycarbonate; O-ring: Neoprene & Buna-N; Metal Parts: Stainless steel (except for optional brass valve); Float: Stainless steel, black glass, aluminum, K monel, tungsten carbide depending on range.
Temperature Limit: 130°F (54°C).
Pressure Limit: 100 psi (6.9 bar).
Accuracy: RMA: 4%; RMB: 3% (RMB-49: 5%); RMC: 2% of full scale.
Process Connection: RMA: 1/8"; RMB: 1/4"; RMC: 1/2" female NPT.
Weight: RMA: 4 oz (113.4 g); RMB: 13 oz (368.5 g); RMC: 39 oz (1105.6 g).
CAUTION: Dwyer® Rate-Master® flowmeters are designed to provide satisfactory long term service when used with air, water, or other compatible media. Refer to factory for information on questionable gases or liquids. Caustic solutions, anti-freeze (ethylene glycol) and aromatic solvents should definitely not be used.
Included
Dwyer RMB-53-SSV Flow Meter, 5" Scale 10-100 SCFH Air, SS Valve
Specifications
Service
Compatible gases and liquids
Wetted Materials
Body: Polycarbonate
O-ring: Neoprene and Buna-N
Metal parts: stainless steel (except for optional brass valve)
Float: stainless steel, black glass, aluminum, K monel, tungsten carbidedepending on range
Temperature Limit
130°F (54°C)
Pressure Limit
100 psi (6.9 bar)
Accuracy
RMA: 4%
RMB: 3%
RMC: 2% of full scale
Process Connection
RMA: 1/8"
RMB: 1/4"
RMC: 1/2" female NPT
Weight
RMA: 4 oz (113.4 g)
RMB: 13 oz (368.5 g)
RMC: 39 oz (1105.6 g)
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.